The pumping and cleaning of septic tanks is actually a highly specific job, as any vacuum truck operator will quickly agree. Not just is it intense, it is dangerous due to the potential contact with highly toxic materials and gases. The proper handling of harmful materials is important, as it could bring about serious illness or even death if not done properly. Because of this, every septic service should make sure that operators are well-trained within the safety procedures involved with not only running the machine but in handling toxic materials in order to guard themselves, others and the environment.
The two main handling occasions when vacuum truck operators needs to be the most observant: when performing the specific job and once emptying and cleansing the equipment. Both can have equally devastating results otherwise properly executed, putting an owning company in danger of fines along with other penalties from OSHA. Even probably the most careful operators can provide an accident, therefore it is necessary that all employees be well-trained and understand and follow all company safety procedures.
Job Site Protection
Following are several things important areas to contemplate when working at a job site.
Opening – Septic containers must be opened with careful attention as solid waste can decompose, releasing toxic gases that fill the tank. Hydrogen sulfide and methane gases might cause a big explosion as well as be extremely toxic and suffocate or kill someone with only some deep breaths. Bacteria can also be found in decomposing material which could be harmful with direct contact. So it is essential to wear safety gear including respirators, gloves and protective clothing.
Flammability – Of course, the hazardous gases would explode in case a spark or flame were encountered, so smoking or any sort of flame is strictly prohibited due to these gases.
Suctioning – When suctioning from the septic tank, operators must be very observant while there is far more associated with this treatment than merely waiting around for a container to fill. Since the material is transferred from the tank in to the truck container, gases together with pressure and temperature can build-up. Any matter left inside the container from the previous job could cause a chemical reaction. Workers must keep a close watch on temperature and pressure gauges to watch for virtually any problems.
Waste Disposal Protection
After a septic tank has become safely and successfully suctioned, the disposal of toxic waste will be the next main safety concern.
Dump Sites – Operators must know where approved dump sites can be found and also document the type of material being carried in order to avoid any toxic reactions, spills or some other accidents. Any rules set forth by the dump site or any governmental agencies must be strictly followed.
Maintenance – Vehicle maintenance has to be performed regularly to avoid potential equipment failure through the dumping procedure.
Cleaning – Once the truck tank continues to be emptied, it should be thoroughly ojlart as leaving a clean truck for the upcoming operation is a very critical safety precaution. As previously mentioned, any material remaining within a truck’s reservoir that could mix with new material coming from a future job could possibly cause a chemical reaction which will at the very least cause delays while the issue is handled and even worse, might lead to the tank to explode.
Ultimately, work safety depends upon employee training and subsequent diligence in following precautionary measures; this ought to be essental to every company. Accidents involving septic pumping may seem to be only an unpleasant nuisance; realistically, it could be much more serious than that. Proper safety methods are essential in providing safe, thorough septic services as well as in reducing any involved risks!